0
I just did this and it's very easy, assuming I did it correctly lol. There is a small black rubber grommet on the inside edge of the door next to the handle. Carefully unscrew it using an Allen wrench until the small fixed portion of the door handle trim loosens. Remove it. You don't have to remove the screw entirely or you'll risk it falling into the door assembly. (I'm not sure you can unscrew it completely.) You'll see a bent steel rod inside that the replacement handle must hook onto in order to release the lock. Pull it slightly forward using a wire hanger. Put the new handle in place, slightly forward of where it will rest, then slide it back so the latch on the handle catches behind the steel rod. Reassemble the trim parts. It might take someone who is familiar with this process less than five minutes to complete!
<SPAN style="POSITION: static" textContent="null">OK</SPAN> i broke my driver side door handle about a year ago and it was a huge pain. you have to find a way to hold the window up then remove the door <SPAN style="POSITION: static" textContent="null">panel</SPAN> then remove the bolts on the inner door <SPAN style="POSITION: static" textContent="null">panel</SPAN> plus the bolts behind the black circle tape. then there is one bolt on the inside of the door jam that needs to be removed then the door lock will pop out and u can put in the new handle then the lock then put it all back together. I was told at the dealer ship where i ordered the new handle that it came with every thing <SPAN style="POSITION: static">(ie</SPAN> the gasket and lock molding) in the kit but it <SPAN style="POSITION: static" textContent="null">didn't</SPAN> i had to order that all <SPAN style="POSITION: static" textContent="null">separate</SPAN>
Good luck
Add your answer:
Earn +20 pts
How do you change a door handle on a Chevy truck?
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
How do you change a door handle on a 2004 Mitsubishi Endeavor?
To change a door handle on a 2004 Mitsubishi Endeavor, remove the 2 screws of the face plate. Then remove the 2 screws on the knob plate. Remove the door handle and replace with new.
Remove exterior door handle on 97 VW jetta gt?
How change door handle,drive side jetta 97
How do you change the left door handle on a 1991 Chevy Corsica?
You have to take the door apart
How do you change drivers door handle on Chrysler 300?
take off door panel by removing screws, push in on middle of holders ,lift panel off of door release clips on door lock and door handle rod remove handle.
How do you change out side door handle on a 98 Chevy truck?
You will need to remove the inside door panel, by prying outward on the door panel retaining clips. When the door panel is removed the door handle assembly will be visible. Remove the door handle retaining bolts.
How do you reset oil change on murano 2004?
How do I rest oil change on murano. 2004
How do you change the drivers door handle on 94 Beretta?
Remove inner door panel for access
How do you install a new door handle on a 1997 Mazda millenia and How do you open the door panel?
There are 3 screw at the bottom of the panel then you can use a door panel remover which the local auto stores sell them to change the handle you will have to gut the door to locate the handle.
How do you change the exterior door handle on 2003 corolla?
You remove it and replace it...
How do you change the outside driver door handle of a 1998 Chrysler Sebring lxi?
From the inside of the door. Its a pain.
How do you change a rear door handle on an impala?
You have to remove the door panel from the inside of the door,and then remove the door linkage from the inside of the door handle. Next there are two bolts that you need to remove from the inside of the door handle,and then it will come off of the car.
