0
Add your answer:
Earn +20 pts
How do you replace hinge pins on ford explorer?
You replace The hinge pins
How do you replace door hinge pins on a 89 f150?
The old door hinge pins have to be cut out with a torch on a 1989 F-150. Then, new hinge pins can be welded into place. This part might be available at an automotive salvage yard for a fraction of the cost of new hinges.
How do you remove hinge pins escort van?
all hinge pins need to be cut out with a tortch or hammer off the top of the bushing with a hammer and screw driver
How do you adjust a door on a Chrysler LeBaron?
you might need to replace the hinge pins.. or the complete hinge
How do you change the door hinge pins and bushings on a 1994 GMC 1500 pickup truck?
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
Where to buy new lower door hinge for 95 Thunderbird?
junkyard or else napa has the hinge pins and rollers
How to replace door hinge pins on 2002 blazer?
http://www.bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
How do you change the door hinge pins in a 1999 GMC sierra?
My advice based on experience is to replace the entire hinge assembly.
How do you replace hinge pins on 2003 avalanche?
need to replace door hindge pins and bushing,how do we get door off safely.
How do you install new door pins and bushings on 2002 gmc Sonoma?
You replace the truck ...it comes with new hinge pins :((
How do you replace door henge's on 1988 Ford F-150?
if you are changing hinges because they are worn, an easier way to go about this is to buy new hinge pins from auto accessory store. cut the old pins out, intall new ones( bushings come with it) job is done
How do you replace the gas tank cover on a Volvo wagon?
Buy a new plastic hinge Volvo part number 31265160. To replace the hinge, push the two center pins through using a punch. This will free up the broken hinge and you can remove it. Attach the new hinge to the door, then set the grommets into the openings and push the pins in to retain the grommet. BE CAREFUL NOT TO PUSH THE PINS TOO FAR. All they need to be is flush with the grommet.
