When installing the cr 125 head gaskets, make sure to check the surfaces for any old gasket materials or scratches. Check the head to make sure that it isn't warped. Make sure that the cylinder pressure isn't too high. Tighten the head bolts in the proper sequence and at the proper torque, and the gasket should stop blowing.
The 1990 Ford Festiva 1.3 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
1/125 of a second.
125 single teaspoon servings is about 2.5 - 3 cups, about 24 ounces.
1) F16@1/60; F16@1/250 2) F11@1/125; F22@1/125 assuming you wish to bracket in full stops
75-125
replace the cylinder gasket and check for cracks and replace the head gaskets
change the reeds witch should be located in the boot between the head and carburetor boot
on my '03' 125SX the head bolts should be 18nm.
yea the crf 150 is much better than the ttr 125 cause my ttr 125 keeps missing up sents i put the bbr 150 bore kit in it
2004 RM 125 Head Bolt Torque is Initial 11 .0 lb-ft, Final 18.0 lb-ft
maybe 1 year is not much different
115 - 125
the specs on the cylinder and the head is between 18 and 20 lbs
22 to 23 suction 125 to 150 on head
A tour pro keeps his card if he places in the top 125 money-winners on the PGA Tour
A Lincoln Head Cent Collection from 1941 can fetch up to $100 if put up for auctions. You can go to local pawn shops to get a better estimate.
About 100-125 head cows and calves