To a degree, but if you are concerned use lacquer thinner.
Lacquer thinner has no sheen. It will thin any lacquer or enamel and imparts no gloss or change of that nature.
Lacquer thinner evaporates quicker. It is cleaner or leaves less of a film than paint thinner. Lacquer thinner will thin most solvent based paint but paint thinner shouldn't be used to thin Lacquer. Lacquer dries from the surface painted out and enammal dries from the surface of the paint down to the surface painted. Using the wrong thinner affects how the paint dries and may affect the final finish.
Lacquer thinner will possibly remove it, chemical stripper will definitely remove it.
Lacquer thinner will thin many types of oil based paint, but not all. -Experiment with a little first.
Acetone or lacquer thinner should do it.
Wipe with acetone or lacquer thinner, then Windex.
To a degree, but if you are concerned use lacquer thinner.
no it will blow upMy VersionLacquer thinner will damage: Fuel linesFuel PumpInjectorsAnd cause major damage to the inside of the engine
Lacquer thinner and a Q-tip
Lacquer thinner has no sheen. It will thin any lacquer or enamel and imparts no gloss or change of that nature.
Lacquer thinner evaporates quicker. It is cleaner or leaves less of a film than paint thinner. Lacquer thinner will thin most solvent based paint but paint thinner shouldn't be used to thin Lacquer. Lacquer dries from the surface painted out and enammal dries from the surface of the paint down to the surface painted. Using the wrong thinner affects how the paint dries and may affect the final finish.
The solvent for varnish is lacquer thinner, but I cannot speak to what the lacquer thinner might do to the woolen item.
The density of lacquer thinner typically ranges from 0.75 to 0.85 grams per milliliter, depending on the specific formulation.
Yes, you can use a lacquer thinner on carbon fiber. However, when doing so, make sure you water the thinner down first or add it to a solvent.
Lacquer thinner (any containing strong solvents like ketones , xylene, toluene, etc) will damage any paint, including clearcoat. A single pack acrylic clearcoat is most vunerable(thinners will destroy it.) , and 2-pack urathane is more resistant, but will soften on the surface and lose its gloss if wiped with lacquer thinners. Thinners for alkyd enamels is fine. It is a mild hydrocarbon solvent found in wax and grease remover, and won't damage the paint.
Lacquer thinner will possibly remove it, chemical stripper will definitely remove it.