0
The K-car was made by Chrysler between 1981 and 1995. The K-car was Lee Iacocca's answer to the problem of the gas-guzzlers of the 1970's. K-cars were marketed under many names, including Aires and Reliant; Lancer and LeBaron; and Shadow and Sundance, among others.
Add your answer:
Earn +20 pts
You are loss the code for kenwood car audio model ix dpx 7021mpi ples gove the master code for unlock your car system?
Go to your local Kenwood authorized dealer and tell them your radio needs the KCAR reset.
How to enter a Password on a kenwood kdc-mpv6022?
ON MOST KENWOOD CD PLAYERS YOU CAN ENTER THE CODE WITH THE REMOTE USING THE NUMBERS LIKE A TELEPHONE 2 IS FOR A,B,C 3 IS FOR D,E,F ETC. THERE IS A UNIVERSAL KENWOOD CODE THAT IS "KCAR"
How can I unlock my kdc 322 Kenwood car stereo -what is the code?
unlock codes for ken kdc-mp435uwood I noted that on www.technologz.com a Kenwood radio was unlocked using the KCAR code. Here is how it was dome: Here are the steps of unlocking a DPX-8070MJ radio player: (1) Press and hold the 1 and then the 6 preset key. There are 6 preset keys or buttons on the face my radio on the left side. The radio will display a "C" just after the "CODE****" (2) You now need to enter the code "KCAR" using a Kenwood remote control (The remote control for my radio is RC-600J). Point your remote towards the radio (3) Press Numeric Key "1" until the letter 'K' is displayed (4) Press Numeric Key "2" until the letter 'C' is displayed (5) Press Numeric Key "3" until the letter 'A' is displayed (6) Press Numeric Key "4" until the letter 'R' is displayed (7) Press "Ent" button on your radio and YOUR RADIO WILL BE WORKING AGAIN
What is the override code for a kenwood kvt-715?
Kenwood Security Code Over Ride Must use a remote with Letters and a Numbered key pad All Excelon CD receivers have the correct remote Head units with a Rotary Volume control Knob: Press and hold the Auto button. While holding the Auto button, push and hold the Track Up button. The "_ _ _ _" will disappear after about 5 sec. Enter KCAR using the <"Arial, sans-serif">remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR" with the remote controller as described below. "K": Press TRACK UP key (>>|) after pressing 5 key twice. "C": Press TRACK UP key (>>|) after pressing 2 key once. "A": Press TRACK UP key (>>|) after pressing 2 key three times. "R": Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly. Video Unlock: Use a remote from a higher end CD Receiver or any Excelon CD Receiver. Some Video remotes will work, switch on remote must be set to AUD. Press 55222277 on the remote. There will be NO visual verification when entering the override code. Head units with a Up / Down Volume control buttons: Press and hold the Volume Up button. While holding the Volume Up button, push and hold the Disp button. The "_ _ _ _" will disappear after about 5 sec. Enter KCAR using the <"Arial, sans-serif">remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR" with the remote controller as described below. "K": Press TRACK UP key (>>|) after pressing 5 key twice. "C": Press TRACK UP key (>>|) after pressing 2 key once. "A": Press TRACK UP key (>>|) after pressing 2 key three times. "R": Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly.
How do you unlock a kenwood ddx512 car dvd player?
Security• Forced Power-ON mode (all models)Even when security is permitted, by pressing and holding[Q] and [4] keys and pressing RESET simultaneously, powercan be ON for 30 minutes. After 30 minutes, recovered onlyby reset.• Simplified security code clearing procedure (simplified securitymodel)1. While code is requested, press and hold [AUTO] key andpress [ ] key for 3 seconds. ("- - - -" disappears.)2. Enter "KCAR" by remote control.Press the remote control [5] key 2 times, display "K",and press the [ ] key.Press the remote control [2] key 3 times, display "C",and press the [ ] key.Press the remote control [2] key once, display "A", andpress the [ ] key.Press the remote control [7] key 2 times, display "R",and press the [ ] key.3. Security is cleared and the source is set to STANDBY.4. If a wrong code is entered, code request mode is displayed.
