earth fault relay is similar like earth leakage ralay,but the 2nd one is more sensitiv.
a fault
A fault line!! Or a fijord- go to www.washingtoninthenorthwest.com and check it out!! or a fissure if your working on a crossword puzzle
== == A fault.
Fault
There is such a thing as a three phase to earth fault, so maybe this is what you mean by a "balanced earth fault". I don't believe any earth or ground currents would flow in this case. A restricted earth fault is a typical phase to earth fault, where the zone of protection is restricted to a specific area, such as around a transformer. "Restricted" is referring to the protection method, not what is actually going on with the currents and voltages.
If one terminal of a battery is earthed (and, by this, we normally mean a 'chassis earth'), then an earth fault within the circuit supplied by the opposite terminal will result in the battery being discharged. The rate of discharge depends on the resistance of the earth fault.
A fault is a fracture or numerous fractures in the earth's crust where the two sides move past each other.
An earth fault relay is a relay that is activated by a fault current that flows from the power line to the earth. Earth fault relays are found in power distribution systems.
Earth fault relay and an over current relay Methods to energies an earth fault relay with simulation diagram?
Yes a fault is a crack in the Earth's crust
transformer max earth fault current
If the earth connection has a high resistance it is not capable of acting as a true earth. For example, the high resistance might mean that the fuse or circuit-breaker will fail to operate when there is a fault.
As per my openion standby earth fault relay work on zero impedance measurement, when earth fault occures than zero
A break in the Earth's surface might be called a chasm, a fissure, or a fault line.
reverse fault, strike slip fault, and normal fault
You can't have a three phase earth fault, you can have a phase to phase or a phase to earth fault. If you want the potential phase to earth fault current it will be your voltage times your impedance. If you want the phase to phase potential fault current then you should just double the above result.