u need to replace the starter solenoid
First You Have To Check The S Terminal On The Starter Or Solenoid To See If Is 12 Volts When You Turn The Switch Into A Runn Position If You Have 12 Volts Then You need To Replace The Starter Motor You Need To Go Under The Truck You Well See The Starter Right Ther Is Realy Symple To Replace Two Or Three Bolts & Two Cables All Depends If Is A V6 Or V8
read up...you may have to unbolt the mount to access the starter... ...everyone should have a manual for their vehicle, and the library should have a professional shop manual available for FREE to make copies of...read up and repair like a PRO! Dave :)
To make your search easier any autoparts store should have a chiltons manual on your car that will show most everything you need, sorry I couldn't supply you with one myself.
The Starter Motor Is Located Under The Intake Manifold, You Have To Remove A Bunch Of Stuff To Remove The Manifold To Get To The Starter, It Is A Small Gear Reduction Starter. Not Hard To Replace At That Point. But A Lot Of Trouble To Get To. I Recommend You Take It To A Good Garrage. Expect To Pay A Pretty High Price Also. Considering The Labor Involved. GOD BLESS
you can but you have to have the explorer kit and you need to have the starter that you picked lv 100 and run around in route 224 an take 100,000,000 step and then you will have another starter you need to be skiled
Check the battery first. Then the conections. If that does not do it you may need a starter, or starter solinoid. PS how old is the battery? One more thing. Will it start if you jump start it? What you need to do is called trouble shooting. Start with the easiest things to fix first.
need to know where transmission plug is for a 2002 ford explorer?
where is the starter located on a 1991 Lexus ls 400. I need a picture so that i can see where it needs to be replaced.
It's possible, but more likely the starter is faulty or wired wrong.
No need to fix the starter, just goto NAPA or Autozone and get a remanufactured one.
i need a picture of the fuse box for 91 ford explorer. Need to know outline of where different fuses go and their volts
need a picture of the hookup of the alternator for a 1995 q45 infiniti
To remove the started on a Polaris 300 Explorer ATV first open the hood. Locate the started which will be up against the wall near the driver's side and remove the screws. You can now install a new started.
you need to remove the black plastic air dam that is covering the bottom of the engine. The starter is then accessible at the front of the motor
We need more info. Need to know the symptoms. Need to know what it does and does not do.
If it is a v6 motor left side of trans on starter if it clicks when trying to start sometimes you can peck on starter motor to get started but will stop working again will need replaced