sure, it is called bace coat/clear coat system and they have been doing it since 1986 ish. Spray your bace till covered let it dry tack cloth the finish then spray your clear, follow directions on can I think the question is whether or not to mix the base coat WITH the clear before applying. It will defeat the purpose of the clear coat as a UV protectant to the base coat. You can do it but I certainly would not recommend it.
Usually there is a base coat of a solid colour, a coat of the chameleon paint, and then a clear coat
balls
Though it is possible to get clear coat to adhere to primer, there are a couple of reasons this is a bad idea. The first and foremost reason is that the primers main job is corrosion protection, coupled with a chemical and mechanical foundation coat for basecoat or color coat in a single stage system, it is not designed to be clear coated. The chemical bond between primer and clear coat would be very weak. Base coat paints have modifications in the resins to allow them to adhere to the primers, and still give the clear coat the proper foundation for it to adhere to, while flowing out in the wet look finish it is designed to have. Also, most of the primer jobs you see running around will have sun faded areas, as well as bleaching in short order. If you want the flat primer look, but have a job that will last, prime the vehicle, base coat it in the gray color you want, but clear coat it with one of the prepackage flat clear coats that are available. The resulting job looks like it is "just primer" but has all the chemical and physical protection of a traditional clear coat job, just not the gloss.
Spray more clear coat over the decals.
Clear coat is applied over a base color for the gloss
with your hands!
This depends on the type of paint. You will have to follow those directions. The colour coat I used recently does not use thinner. The clear coat used 25% thinner and 25% hardener.
i used clear ttop coat NYC nail polish XD
Yeah but it wont be as shiny...
sure, it is called bace coat/clear coat system and they have been doing it since 1986 ish. Spray your bace till covered let it dry tack cloth the finish then spray your clear, follow directions on can I think the question is whether or not to mix the base coat WITH the clear before applying. It will defeat the purpose of the clear coat as a UV protectant to the base coat. You can do it but I certainly would not recommend it.
By transforming your biometrics - like your eyes and face - into a single touchless ID, you can rely on CLEAR for a faster, safer experience, every time. CLEAR keeps you moving, without contact or crowds. Find CLEAR in 65+ airports, sports venues. cutt.ly/VjxULaY
If it is single stage paint then no if base coat then yes....
If there are scratches on the surface before you clear coat, the clear will not come out smooth. If you are spraying new clear coat over an old clear coat, the entire surface must be wet sanded with at least a 600 grit wet/dry paper so the surface is rough enough to accept the clear. If you are spraying new clear over an new base coat, the same techinque for prepping the surface will be necessary if the base coat has dried.
Usually there is a base coat of a solid colour, a coat of the chameleon paint, and then a clear coat
balls
well what i do is i put a top coat on then my base coat with little designs usually then i put a clear coat not to thick though! hope that helps!