No they won't let you.
If the acrylic painting has been hanging for a long time, try using a cotton swab and some acetone fingernail polish remover. The polish remover should wipe the marker from the paint without lifting the paint. Take your time and use just the tip of the swab and the marker should lift off into the swab.
Its strong and shatter resistant, waterproof, anti-weathering and ultraviolet proof
yes it is possible to spray paint a styrofoam ball. before spray painting a styrofoam ball, you must take a wet papertowel and smoothen out the styrofoam ball with it.
For oil paintings: best let it dry for a longer time (6 months or so), then put dammar varnish over it. The long drying time makes sure you can take off the varnish later, without harming the paint itself.
Years apparently
It takes roughly 30 minutes for the laptop to cool down to a normal state.Or if you want to use it soon it could take I guess 10-15 minutes.
The time it takes for a kettle to cool down can vary depending on the material of the kettle, the amount of water inside, and the surrounding temperature. On average, it may take anywhere between 30 minutes to an hour for a kettle to cool down completely.
5 hrs to freeze solid
take it out of the oven and leave on a raised surface. leave for as long as it takes to cool down. Ten to 15 minutes should be plenty.
The time it takes for boiling water to cool down in a stainless steel container can vary based on factors like ambient temperature, container size, and insulation. In general, it could take around 10-30 minutes for the water to cool down to a safe drinking temperature.
Water is evaporated, an edothermic process; also heat is lost by conduction, radiation, convection.
The time it takes for boiling water to cool down to 185º depends on factors such as the initial temperature of the water, the volume of water, and the surrounding environment. On average, it may take around 30-45 minutes for boiling water to reach 185º.
It typically takes a few minutes for pewter to cool down to room temperature after it has been melted and poured into a mold. The exact cooling time can vary depending on the size and thickness of the pewter object being cooled.
It can take anywhere from several years to several decades for a nuclear reactor rod to cool down to a level where it can be safely removed from the reactor core and stored. Cooling times vary depending on the type of reactor and the specific isotopes present in the fuel rod.
Hot toffee takes a long time to cool because it is a highly-concentrated sugar syrup. As it cools down, the sugar molecules rearrange themselves into a crystalline structure, which takes time. Additionally, the high sugar content means that toffee has a lower heat capacity, requiring more time to lose heat and cool down.
I think that it takes about 1-2 minute to cool but I am not sure...