It technically does not make work easier, you really do the same work. But if you meant force applied, you do apply a smaller force. Since you may apply the force further from the fulcrum (point of rotation) than the load is therefore the force required to lift the load is smaller. This is true because of torques which is force X distance from fulcrum, therefore to apply the same torque if you increase distance your force subsequently decreases.
Returning to the comment that work is constant, since you are applying a force further from the fulcrum, the distance you have to push is further; therefore, due to Work = Force X Distance, you still do the same work since even though your force decreased, distance had increased.
**********************
Although the lever does not change the work, it **does** make the work easier. You are more concerned with the force that you have to apply than with the mechanical work input and output, so you are expending less energy by applying less force. I think this is what you mean by "easier". If simple machines did not make life "easier", we would never have bothered to invent them!
These make it easier for people with few computer skills to work with and use computer software.
Be sure to comment on other peoples work and make many friends! It is much easier to gain watchers if people know you exist! If you don't comment and make friends some people may never see any of your work! Good luck! :)
They preheat the air in the cylinder to make starting easier. they actually heat the diesel fuel to make starting easier
one lever in a bathroom is a toilet lever hope that helps:)
It helped us make clothes faster.
A device to make work easier is a machine, such as a lever.
a lever makes work easier in the sense that it help carry a heavy load from the ground in a process called lifting!
Sorry I meant LEVER
to make your work easier . to less the working time
how does levers make work easie
A lever allows you to apply a smaller force over a larger distance to move a heavier load over a shorter distance, which makes the work feel easier. This is due to the principle of mechanical advantage, where the lever amplifies the input force to overcome the resistance of the load.
a machine is a tool used to make work easier. any tool that pries something loose is a lever. a lever is a arm that "pivots" (or turns) against a " fulcrum" (or point).
A first class lever makes work easier by allowing the force to be applied at one end of the lever to achieve a greater output force at the other end. This lever type increases the distance over which the force is applied, which reduces the amount of force needed to accomplish a task.
A wheel and axle is a special kind of lever, as it combines rotational motion (wheel) with linear motion (lever) to make work easier.
The handle on the crank is a essentially a Lever. It makes it easier to pull in heavy loads on the cable attached to the winch.
A lever helps make work easier and faster by allowing you to apply a smaller force over a longer distance to lift or move a heavier object. By using a lever, you can amplify the force applied to the object, making it easier to lift or move with less effort and in less time. Lever can also help in precise control and manipulation of objects in various tasks.
when the load is at a constant position on the lever arm, how can you make it easier to life the load?