Jasco - it's a chemical used to remove paint. You could use a heat gun, but the aluminum will take a lot of heat before the paint starts to peel off.
Spray cans are filled by weight and not volume and it would depend on the size of the spray can, but it should take about four to five 12 oz net weight cans of spray paint to equal approx a quart of paint. How much makes it on the project and how much ends up as over spray depends on the painter.
yes it is possible to spray paint a styrofoam ball. before spray painting a styrofoam ball, you must take a wet papertowel and smoothen out the styrofoam ball with it.
You can but flow will not be optimum and it will take more dry time
The best thing to do is have the furniture stripped ( shotblasted or at a dip and strip). Then have it primed (etch) and powder coated the colour of your choice. This will give you a very good finish.
you take the paint and put it on the end of the bike first and work your way up !
Spray paint guns are usually used to paint things like cars. I wouldn't recommend using one for inside jobs. You should use regular paint, and paint it on there, or take the table outside and use spray paint. You don't need an industrial paint gun.
take a real twinkie and spray paint with a clear acrylic paint or sealer
Jasco - it's a chemical used to remove paint. You could use a heat gun, but the aluminum will take a lot of heat before the paint starts to peel off.
Yes, but you'd have to take it out of it's retail packaging first, destroying it's collectable value. Once you've done so, spray it with a primer, then paint it with a durable acrylic paint.
Are you spray painting your eyes? If so, yes? I would HIGHLY recommend not getting high on spray paint. I'd tell you to go do something constructive, or even take a hike and try to find some drugs in your area. But spray paint is probably not the best idea for your brain.
Spray cans are filled by weight and not volume and it would depend on the size of the spray can, but it should take about four to five 12 oz net weight cans of spray paint to equal approx a quart of paint. How much makes it on the project and how much ends up as over spray depends on the painter.
first take a clear body and paint it white. then take the colors you want and spray. make sure you do this in the inside of the body.
no u have to wipe the internals, sand it down nd then spray paint it. put at least 2-3 coats on it.
ANYTHING! as long as you add adhesion promoter before you apply the paint, this allows you to use any kind of paint and they will stick to plastic.
yes it is possible to spray paint a styrofoam ball. before spray painting a styrofoam ball, you must take a wet papertowel and smoothen out the styrofoam ball with it.
Normally, you cant. The best thing to do is take a new can of spray paint and replace the spray tip. The tip is commonly clogged because most people dont invert the can and clear the tip of old paint from the last use. The old paint dries up in the tip and the can doesnt have enough pressure to remove the dried paint. When you are done using a spray paint can, turn it upside down and spray until nothing but air comes out. 1-2 seconds should do it. This will ensure it will work the next time you use the can.