That's as easy as it gets in the transmission world. If you are mechanically inclined just figure it out. If not, don't touch it.
Chat with our AI personalities
The 02 Chevy S10 with a 4 cylinder or a 6 cylinder does not have a timing belt.
90psi
under exaust manifold on passenger side
It is inside the bellhousing. The transmission must be removed to gain access to it.
Considering the Silverado has a 6 lug rim and the S10 has a 5 lug rim, it would be an expensive project to convert the 5 lug S10 into the 6 lug pattern of the Silverado.
It should be, yes.
i have a 1999 stepside s10 and they are 205/75/r15
Yes
R134a
32 inches
no it will not
Probably the 700R4
4L60E transmission was in the 1/2 tons. 3/4 tons had a 4L80E in them.
Double check that everything has been undone.(mounts, wiring, ground straps, fuel lines etc.)If everthing is o.k. you may just have to fight with it a bit.
dexicool
Always use syncromesh fluid from the dealer.
It is inside of the transmission bell housing. You will have to remove the transmission to service it.