answersLogoWhite

0


Best Answer

To install an ignition coil on a 1986 Chevy Celebrity:

1. With the ignition off unplug the wire harness from the coil, also remove the coil to distributor wire.

2. Remove the bolts that hold the coil mounting bracket to the intake manifold.

3, The coil should now come off.

4. The new coil comes without the mounting bracket. Therefore you must cut the rivets loose that hold the old coil to the bracket. The new coil should come with screws and nuts to mount it to the old bracket. Mount the coil to the bracket.

5. Position the coil mount onto the intake manifold and bolt it down.

6. Plug the cables and distributor lead back into place.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install an ignition coil on a 86 Celebrity?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

If there is no power to an hei coil on an 86 305 how would you go about getting power to it?

Check the ignition fuse also check the ignition switch


You have an 86 190E 23 does it matter if you use a ignition coil from a 23 16v engine?

yes it would matter


What if your 86 bronco ll will not start evn though you have replaced the battery and ignition coil?

it could be the control module


Why won't 86 escort start plugs aren't firing?

Could be a bad ignition coil Could be a bad distributor cap or rotor


86 gmc safari van not getting any spark coming out of the distributor to the spark plugs?

ignition coil is broken replace $ 60.00 in Canada


How do you test the ignition coil on an '86 Toyota pickup 22re?

get a volt meter. turn it on. put one end on the +. the other end on the -. if you get a number greater than 12 with the car running then your golden.


How do you change a ignition coil on a Chevy Caprice?

It depends on what year it is. 74 and older have a bottle style coil mounted to the intake to the driver's side of the distributor. 75-86 have the coil mounted in top of the distributor cap (make sure you replace the coil with the correct coil. If it has a white wire, it must be replaced with a white wire coil. If it is a yellow wire, it must be replaced with a yellow wire coil). 87-95 uses a square coil mounted to the intake and has two wire conntectors and the coil wire. LT-1 motors use a crank trigger ignition system that has a different coil system altogether. I don't have information on this system.


86 Chevy Celebrity rim size?

14 inch


How do you increase rev limit 650 sx jet ski?

You cant without replacing the coil. The 86 X2 coil did not have a rev limiter so if you want higher revs go for that. You could also fork out $400 and get a dales bad attitude ignition set up.


Can I put the ECM module from my 1990 Chevy Celebrity wagon into an 86 Chevy Celebrity wagon?

Yes


On an 86 Toyota truck what should the pickup coil resistance be?

Distributor pickup coil resistance 140-180 ohms.


How do you change an oil pan on a 86 Chevy Celebrity wagon?

Does your 1986 Chevy Celebrity have the 2.5L 4 cylinder engine or the 2.8L V6?