To lime wash furniture, simply lay out a plastic sheet to lay the furniture on. Mix the lime wash with water. The amount of water you choose depends on the consistency you want. Next use a paint brush to apply to the furniture. Allow it to dry thoroughly before applying a second coat.
I use them only to stain furniture that I've made and I've found the best way is applying it with a lint-free cloth and rubbing it in with small circular motions,
Try using oxalic acid, also called wood bleach, on the water damaged area before attempting to stain the wood. If that removes the stain, sand the surface, use a wood conditioner or a clear stain as a first coat, then apply the colored stain. Once that's dry, apply a clear polyurethane for interior use, or a spar varnish for exterior use.
Yes.
No, I have tried this and the end result you get is a very washed out blotchy stain that is very hard to apply. You can try bleaching the stain, and re-apply a stain that has a very close color that can mimic the stain you already have.
There really isn't a way to remove a paint thinner stain from wood furniture. You must repaint or re-stain the furniture.
No, you should not apply urethane over deck stain. You should sand down the old deck stain first before applying any other type of finish.
be careful, if it is an antique removing the old stain could depreciate its value. But, it you don't care or if you have already taken off the old stain, then you can apply it witha rag going towards the grain. Remember when it is dry to put varathane on it
It is generally recommended to apply waterproofing product after staining the deck. Stain helps to enhance the appearance of the wood and the waterproofing product helps to protect the wood from moisture and prolong its life.
No
Yes.
You can try Cabot’s Natural Oak Stain Finish or whatever color you wish to apply. They have a variety of stain colors to choose from but depending on the original color of your furniture whether you want to use the same or stain it with an entirely different color which would be more laborious as you need to do a lot of sanding.
To lime wash furniture, simply lay out a plastic sheet to lay the furniture on. Mix the lime wash with water. The amount of water you choose depends on the consistency you want. Next use a paint brush to apply to the furniture. Allow it to dry thoroughly before applying a second coat.
To stain rawhide, first clean and wet the rawhide, then apply leather dye or oil-based stain using a sponge or cloth. Allow the rawhide to dry completely before applying a sealant or finish to protect the stain and the rawhide.
Depends on the type and use of the furniture. I wouldn't want a nice table to be painted when I could stain it and bring out beautiful wood patterns.
I use them only to stain furniture that I've made and I've found the best way is applying it with a lint-free cloth and rubbing it in with small circular motions,
It is highly recommended to treat the lipstick stain as soon as possible. Apply a before wash stain remover and rinse the shirt in warm water, being careful not to rub the stain.