0
Add your answer:
Earn +20 pts
Can a roof have 4 planes?
Yes. A roof with 4 planes could be a hip roof - all four sides of a rectangle building have a slope as opposed to a gable which is sloped only to 2 sides, and therefore has 2 planes. It could also be a gambrel roof which is like a roof on a barn.
Does a person with subchondral cysts and sclerosis within the roof of the acetabulum need a hip replacement?
yes
What kind of flashing is used on a roof dormer?
A dormer is a small piece of roof that projects from or is not in plane with the main roof plane. It has a junction with the main roof and this junction is where the flashing is required. Dormers can vary in shape, so the exact form of flashing required will vary. The type of flashing also depends on the roofing material, and whether the same material is on the main roof and the dormer roof. If the main roof plane and the dormer are of the same material, the flashing can usually be the same as used on a similar junction of the main roof. Important parts of a basic flashing are: * it laps from under the upper or higher roof cladding so that water will run down onto it from the higher cladding, and it laps over the lower roof cladding so that water running down it will run onto the lower cladding, rather than underneath the lower cladding. Flashings that run parallel to the fall of the roof are a little different but follow the same principle: look at the path the water will follow. * It is lapped a sufficient distance under and over the cladding to prevent water seeping back. This distance will depend on the roofing material, the material's profile, the strength of wind in the area and the rainfall of the area. * It may also need a return or kickback on the flashing to prevent capillary action or wind driven moisture. Flashing materials must be compatible with the roofing material. Water running over some materials will collect ions that may make materials that this water then runs onto be stained or corrode quickly.
In Save the Last Dance Sara performs at the end of the movie with a combination of what 2 dance styles?
Hip-Hop and Ballet
What is the rear hip room of the 2013 Dodge Dart?
The 2013 Dodge Dart has 52.6 in. of rear hip room.
What is the definition of a clipped gable roof?
The end of a roof when it is formed into a shape intermediate between a gable and a hip; the gable rises about halfway to the ridge, resulting in a truncated shape, the roof being inclined backward from this level.
Which is cheaper to build a hip or gable roof?
Labor cost for hip roof would be more then gable. Materials are about the same. Hip roof cost slightly more.
Is a hip roof better than a gable roof?
Neither is "better" in terms of usefulness or structural efficiency. Hip and gable are primarily responses to design needs. A hip roof is slightly stronger than a gable.
Is a hip roof stronger than a gable roof?
a hip roof is stronger than a gable roof because it braces itself and cannot move from side to side.
What is hipped-end in roof construction?
A hipped end in roof construction is a roof end plane that is inclined, instead of having a gable end.Some roof designs can have a hip at one end, and a gable at the other end.
Where is the ridge on a roof?
The highest point, the peak of each gable or hip.
What is gabling?
Gables in House ConstructionA gable on a house is the triangular end of a house with a pitched or angled roof. The number of gables on a house depends on the construction of the roof; the standard "box-shaped" house with a non-hip roof will have 2 gables. A gable can also refer to the wall containing the gable end as defined above.Also note that this type of pitched or angled roof is also known as a "gable roof."Gable is my last name so how is that possoble?
What are gables used for?
Gables in House ConstructionA gable on a house is the triangular end of a house with a pitched or angled roof. The number of gables on a house depends on the construction of the roof; the standard "box-shaped" house with a non-hip roof will have 2 gables. A gable can also refer to the wall containing the gable end as defined above.Also note that this type of pitched or angled roof is also known as a "gable roof."Gable is my last name so how is that possoble?
What is the gable end for?
The gable end (of a roof) means you don't have to cut hip rafters to frame the roof. It also allows for cross ventilation in the roof space or if it's a living space permits area for windows without the need to build dormers.
If the roof is slanted what shape is the roof?
With the little info provided all that can be determined is that it is a pitched or sloped roof. If you want to know more, for example, that the roof is a gable or hip construction, your description needs to be more precise.
Can a roof have 4 planes?
Yes. A roof with 4 planes could be a hip roof - all four sides of a rectangle building have a slope as opposed to a gable which is sloped only to 2 sides, and therefore has 2 planes. It could also be a gambrel roof which is like a roof on a barn.
How many trusses do you need for a 30wx45lx15h garage?
For a gable end to gable end installation on 16" spacing you would need 34 trusses, 2 of which would be the gables. If your roof-line has hip ends or will be incorporated into an existing structure there will be more trusses.
