Yes it does. It is a very strong solvent witch will melt the vinyl leaving a discolouration . I tryed paint reducer with the same result.
I am pretty sure you can that you can use a paint marker on a vinyl banner. I'd be careful though; test it out on a scrap piece if you can.
No. Vinyl is a substance all of its own. That's why they may vinyl and latex gloves. So that those who are allergic to latex can use the vinyl. Otherwise there would be no point in making vinyl gloves especially seeing that latex is stronger and more protective than vinyl.
There the same thing. Vinyl siding is a PVC plastic resin siding.
no
They sell hanging clips for vinyl siding. Its an S shaped rigid metal hook that slides up underneath the vinyl and hooks on.
Yes it does. It is a very strong solvent witch will melt the vinyl leaving a discolouration . I tryed paint reducer with the same result.
I am pretty sure you can that you can use a paint marker on a vinyl banner. I'd be careful though; test it out on a scrap piece if you can.
yes, an ideal paint job would 'shoot' the whole vehicle at the same time under the same conditions.
If it is vinyl tile and it's latex paint, rubbing alcohol will remove it. If it is a ceramic or porcelain tile, you can carefully scrape it off or if it is also latex paint, the same thing,,,alcohol will remove it.
It would be your preference, but you're right: they should be the same.
No, vinyl and PVC are not the same. Vinyl is a type of plastic resin, while PVC (polyvinyl chloride) is a synthetic plastic polymer derived from vinyl. Vinyl can refer to a broader range of materials, while PVC specifically refers to a type of vinyl.
No they are not. Polyols are polyalcohols. Vinyl polymers are polymers of monomers of the type CH2=CHX .
Blue Paint. Because paint all smells the same.
no
No. Vinyl is a substance all of its own. That's why they may vinyl and latex gloves. So that those who are allergic to latex can use the vinyl. Otherwise there would be no point in making vinyl gloves especially seeing that latex is stronger and more protective than vinyl.
depending on if the paintball gun consists or plastic and metal i suggest that you take sand paper to the metal and rub the metal peices and then paint it with spray paint then after give the plasic a rub with sand paper and do the same but put tape over the parts you dont want painted