If you are painting a residence the chances are your enamel is a water borne acrylic enamel. Conversely, if you are referring to acrylic and enamel spray cans then the answer is yes you can spray one to another without any problems. Always be sure your paint is completely dry before applying successive coats.
Enamel is a word used to describe a finish, not the formulation of a paint. It simply means a hard reflective surface. Many people mistakenly use the word enamel when referring to oil based paints. So. if you are asking if you can paint latex or acrylic paint over a latex or acrylic enamel the answer is yes, however, I strongly recommend you sand the old paint first to give the top coat "tooth". If you are asking about painting latex or acrylic over an oil based paint the answer is still yes, however you must first sand the old paint and apply a good quality primer to it. Check with a reputable paint retailer for the best brand in your area.
It is very easy to coat enamel paints with acrylic paints but you really should pay attention to a couple of points if you want it to be successful. Always sand the the enamal well and fill any holes with lindeed putty then apply a good coat of undercoat. I use an oil based undercoat first and then several days later sand the undercoat lightly and coat with acrylic all purpose undercoat. Once you have done this you can apply acrylic top coats. If you are using a self priming type acrylic paint on external work, you could skip the acrylic undercoat and apply it straight on to the oil based undercoat but you must leave it for several days to dry completely before coating with acrylic. I have used both methods over the past 5 years and both have not shown any sign of problems to date.
Flashing occurs when a surface has not been properly sealed, so a latex acrylic primer applied over the surface first will keep an eggshell enamel paint from flashing.
You can paint over latex paint with either an oil or water based enamel paint as long as the surface is dull, clean and rust free. Any bare metal will need to be primed with a primer, either oil based or 100% acrylic Direct-to-metal, prior to top-coating.
yes
No, you can't.
It will protect the paint as long as you use a water based varnish, never use oil based varnish over water based paint. Tip: "water based enamel= water based finish". "oil based enamel= oil based finish".
If you are painting a residence the chances are your enamel is a water borne acrylic enamel. Conversely, if you are referring to acrylic and enamel spray cans then the answer is yes you can spray one to another without any problems. Always be sure your paint is completely dry before applying successive coats.
Enamel is a word used to describe a finish, not the formulation of a paint. It simply means a hard reflective surface. Many people mistakenly use the word enamel when referring to oil based paints. So. if you are asking if you can paint latex or acrylic paint over a latex or acrylic enamel the answer is yes, however, I strongly recommend you sand the old paint first to give the top coat "tooth". If you are asking about painting latex or acrylic over an oil based paint the answer is still yes, however you must first sand the old paint and apply a good quality primer to it. Check with a reputable paint retailer for the best brand in your area.
Yes, you can.
Yes you can.
An oil based exterior acrylic enamel will stand up to the elements for some time to come.
It is very easy to coat enamel paints with acrylic paints but you really should pay attention to a couple of points if you want it to be successful. Always sand the the enamal well and fill any holes with lindeed putty then apply a good coat of undercoat. I use an oil based undercoat first and then several days later sand the undercoat lightly and coat with acrylic all purpose undercoat. Once you have done this you can apply acrylic top coats. If you are using a self priming type acrylic paint on external work, you could skip the acrylic undercoat and apply it straight on to the oil based undercoat but you must leave it for several days to dry completely before coating with acrylic. I have used both methods over the past 5 years and both have not shown any sign of problems to date.
Acrylic, like enamel paint, can be matt, gloss, or satin finish. Please see the related link below.
This is the common car paint from the 1970s through the mid 1990s It is a development of earlier enamel paints and is still available for those who want it.
Oil based metal priming paint along with a 100% acrylic latex exterior house paint.