Remove and replace the starter.
Your vehicle has a starter solenoid which is piggy back on the starter.
Disconnect the - battery cable Raise and support vehicle Disconnect the wiring at top of starter Remove mounting bolts Remove starter
Wires connected to the starter incorrectly or defective ignition switch.
hello i need to know what wires i need to hook up for my aftermart remote start in in 94 Chevy s-10 truck with a 2.2 motor
The starter or battery could be weak. The weakness will cause the starter to turn too slowly to start the truck.
What type of truck is this?
Remove and replace the starter.
On my truck ( 1994 Chevrolet ) it is on the starter. If you want an answer about another vehicle you will need to ask a new question and include year, make, and model.On my truck ( 1994 Chevrolet ) it is on the starter. If you want an answer about another vehicle you will need to ask a new question and include year, make, and model.
It could be the starter in it. It may be weak or need replaced.
A 93 GM truck? Yes. Replace the starter every four years as part of regular maintenance.
check/replace spark plugs and wires
Assuming the starter does not crank over the engine, it could be, dirty or loose battery connections, a bad starter, a bad neutral safety switch, the engine is seized.
Dirty battery cables are maybe just loose. Bad starter wire conections are starter.
It should be above the starter on the engine block.
the starter,battery and the alternator are good,icheck and change the the wires but the light inside the dashboard,the headlights come on but the truck will not start.
It is screwed into the passenger side of the engine block between the starter and motor mount. You will have to get under the truck to be able to see it