there are 4 nuts under the car...
Pull lever at the front of the seat up and pull the entire seat forward. It will come straight off the runners.
how do I remove the front seat from a 1991 fatboy
Remove front passenger seat on Lexus es300?
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.
1) Remove the back seat (pillion seat) 2) Then remove the screw that holds the front seat ( its in the middle), with a philips screwdriver/ allen key 3) lift out the front seat and locate the battery
First disconnect the connectors under the seat. Remove the 3 bolts (Front Left, Front Right, Rear Right). Remove the nut from the Left Rear. Lift seat up and out.
The bottom section comes out a little bit easier than the "back" section. Along the floorwall section there is a metal loop that fits into metal bracket under the seat. You will need to pull up on the back of the seat and then push down on the front. You will then be able to take the seat out of the car. The back section also has a similar bracket near the center of the upper back support. You will need to unscrew 4(?) metal screws in the framework of the back support and then lift the section out.
There are bolts that you must remove in order to take out the front seats of a 2002 Monte Carlo. There are two in the back of the seat and two in the front of the seat. If you have heated seats you will also have to remove the wires for that before you take the seat out.