answersLogoWhite

0

What else can I help you with?

Related Questions

What is the purpose of the tub drain shoe in a bathtub plumbing system?

The purpose of the tub drain shoe in a bathtub plumbing system is to connect the drain pipe to the bathtub and provide a secure and watertight seal to prevent leaks.


How do you get bottom drain out of bath tub to replace tub?

The piece in the drain is screwed into the drain under the tub It is usually corroded and is not going to unscrew. You can use a sawsall or jig saw to cut the drain in 3 or 4 places around the opening and peel the piece out. You can also disconnect the drain under the tub and just leave it on the tub. There should be access to the back side of the tub. Usually a panel or door in the back of a closet that is in the room beside the bath. If there is no access, you will need to make one so that you can connect the drain to the new tub.


Can you provide me with instructions on how to install a pop up tub drain?

To install a pop-up tub drain, first remove the old drain by unscrewing it from the tub. Then, insert the new pop-up drain into the drain hole and secure it in place. Connect the linkage rod to the drain and adjust it to the desired height. Finally, test the drain by filling the tub with water and checking if the pop-up mechanism works properly.


How can I properly connect the tub drain to the waste pipe?

To properly connect the tub drain to the waste pipe, you will need to ensure that the drain assembly is securely attached to the tub and that the waste pipe is properly aligned and connected to the drain. This typically involves using a drain wrench to tighten the drain assembly and using PVC glue or plumber's putty to seal the connection between the drain and the waste pipe. It is important to follow the manufacturer's instructions and local plumbing codes when making this connection to ensure a proper and leak-free installation.


What is the name of the drain breather on a tub?

The drain breather on a tub is called an overflow drain.


Is my tub leaking from the overflow drain?

To determine if your tub is leaking from the overflow drain, fill the tub with water and observe if the water level rises above the overflow drain. If water is leaking from the overflow drain while the tub is filled, then it is likely that the tub is leaking from the overflow drain.


What are the steps to install a new drain for a tub?

To install a new drain for a tub, follow these steps: Remove the old drain assembly. Clean the area around the drain hole. Apply plumber's putty to the new drain flange. Insert the new drain flange into the drain hole. Tighten the drain flange with a drain wrench. Connect the drain pipe to the new drain assembly. Test the new drain for leaks. Seal any gaps with silicone caulk if needed. These steps should help you successfully install a new drain for your tub.


How can I remove a tub drain without using any tools?

It is not possible to remove a tub drain without using any tools. Tools such as a drain key or pliers are typically needed to unscrew the drain and remove it from the tub. Attempting to remove a tub drain without tools may cause damage to the drain or the tub itself.


How can I replace a tub drain?

To replace a tub drain, you will need to remove the old drain using a drain removal tool or pliers. Then, clean the area around the drain and apply plumber's putty to the new drain before inserting it into the tub. Tighten the new drain securely using a drain wrench, and test for leaks by running water into the tub.


What is the best way to install a tub drain adapter for a new bathtub?

To install a tub drain adapter for a new bathtub, first, remove the old drain assembly. Then, apply plumber's putty to the underside of the new adapter and insert it into the drain hole. Tighten the retaining nut to secure the adapter in place. Finally, connect the drain pipe to the adapter and test for leaks.


What if your toilet overflowed and then there is water in the bathtub confused?

The tub and toilet connect to the same drain at some point. The main drain was plugged but the connection between the toilet and tub was still open. Water seeks it's own level. When the water came up in the toilet, the tub was lower so some of it went there.


How do you remove an old tub from the drain?

Once the old tub gets into the drain it is impossible to remove.........