answersLogoWhite

0


Best Answer

Generally when the head gets replaced you would also want to replace your plugs as well. It can sometimes be a result from where the water has traveled into the oil from a bad head. I replaced mine with bosch platinum 2 and haven't regretted it for 2 years.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: You replaced the head on your 1997 Chevy s10 22l 4 cylinder and it wont idle without sounding like it's missing why?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you unlock the door with a key without sounding the panic alarm on a 2005 pacifica Chrysler?

You can not. Chrysler did not put a key cylinder disarm switch on that vehicle.


How do you write a bitchy letter without sounding bitchy?

ummm... I don't think you can. And what would be the point? A bitchy letter without sounding bitchy? Isnt the point to sound bitchy?


Brake peddle hard but goes down slowly?

Air in a brake line or a bad master cylinder could cause this. Bleed the brake lines if you have been working on any brake cylinder. If this happened without any warning, the master brake cylinder is probably the cause and should be replaced.


What are the release dates for Missing Without You - 2009?

Missing Without You - 2009 was released on: USA: 13 April 2009


How do you unlock a 1999 Kia Aportage without the alarm sounding?

try unlocking it from the driver side...the chip in the key should keep the alarm from sounding...it works for my sportage...


Can you replace valve seals without taking the head off a Mazda b2200?

To replace the valve stem seals with the head on you must bring each cylinder up to top dead center, pressurize the cylinder with an air chuck screwed into the spark plug hole. (this prevents the valves from dropping into the cylinder) Now the seals on that cylinder can be replaced. The process is repeated on each cylinder. Note: you must prevent the engine from rotating when the cylinder is pressurized.


On a 1991 Camaro RS 3.1 liter 6 cylinder can the fuel pressure regulator be replaced without replacing the fuel rail?

The fuel pressure regulator has one bolt holding it in place.l


What is homonym for yoke?

Yolk, as in the yolk of an egg. It is perfectly proper to pronounce it without sounding out the "l".


How do you submit a request to join a group on deviantART without sounding stupid?

what do you mean "sounding stupid"? just simply submit a request and state the reason why you want to be in the group if necessary -myspace.com/hipsterface ________________________________


Without a Trace is about a CIA missing-persons unit?

False - its about a FBI missing persons unit


What would be wrong with your 1985 TC that is missing and has had replaced module on distributor plugs wires rotor cap gas filter but is still is missing Thanks?

Run a compression check on all cylinders. Make sure you mark the sparkplug wires before you pull the plugs so that you can get them back to the right place without too much trouble. As you pull the plugs, check each one to see the color of the insulator. If there is one plug that is black and the rest are white or light brown it might be an indicator that the cylinder is missing. Write down the compression of each cylinder as you check them. If one or more is considerably less PSI than the others it/they may have burned valves. If the plug is black but the compression is up it might be oil fouling from bad rings or valve stem seals.


What is the meaning of rants?

To rave in violent, high-sounding, or extravagant language, without dignity of thought; to be noisy, boisterous, and bombastic in talk or declamation; as, a ranting preacher., High-sounding language, without importance or dignity of thought; boisterous, empty declamation; bombast; as, the rant of fanatics.