Wiki User
∙ 16y agocheck fuses and relays and flasher and go from there
Wiki User
∙ 16y agoThe flasher is actually the hazard switch itself. If removed turn signals will not function. Just pop the old switch out and unplug it to replace if broken (if present and signal don't work).
The flasher is a type of switch that regulates the turning on and off of your vehicle's turn signals and hazard signals.
Integrated with the hazard flasher switch (which is in the dash)
Blown fuse or bad flasher unit. Often, cars use different flasher for the turn signals and the flasher, so it is possible for the hazards to work and not the turn signals.
have you tried replacing the flasher u need to replace the flasher can for the turn signals there are 2 one for hazards and one for turn signals usually found in the fuse box, and cost about 3 bucks
It has a flasher relay for the signals only.
Yes. The relay that controls the turn signals is built in the switch.
yes i changed all of that but it still is not working so im wondering what else could be causing this
AFAIK the flasher is built into the multi-function switch.
Bad switch? Bad hazard flasher?
The turn signal flasher is incorperated with the Hazard lamp switch. The switch must be changed,then the directional lamps will work correctly.
Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,