not one
Where the driveshaft comes out is called the tailshaft. Its at the end of the tailshaft.
Try and reword your question so that I can understand what you are asking!!!!!!!!!!!
NO, the dodge is 8 on 6.5 bolt circle while ford, in 99, switched to 8 on 170mm bolt pattern. Superduty started in 99 so all was metric.
Yes, the only difference betweena 350 and a 250 is the rear springs.
8x6.5 is 8x165.1mm 8x170 is 8x170mm There is about a 5mm difference in the bolt patterns. The 8x170 is only for FORD Superduty 99 or newer.
no
Wheels on 1997 and earlier-8x6.5. 1999 and later-8x170mm. Not interchangeable.
Mine does not have a block heater. It has a oil heating element on the top of the oil filter housing. It's a '99 F350 7.3l diesel.
Driver side of the engine low back.
remove the inner wheel well and it will be there
If you take care of it you sure can many times.