There is no Power Steering in a Mercury Villager at start up in cold weather due to a failing pump or low fluid. Fluid becomes much thicker in cold weather and is much harder to pump.
Motorcraft MERCON ATF
No.
The belt is tightened with an adjusting screw.
There are several sections of power steering hose on this vehicle, both supply and return. They run from the reservoir down to the supply lines to the steering rack.
on the front passenger side of the vehicle it is the pump that has the third belt n it
You probably have an air lock in the pump. You need to take the pump apart and assenble the veins with vasoline so it will prime itself. GoodluckJoe
Into the power steering reservoir.
It is to the right of the steering wheel, behind the paneling below where your knee would rest. You do not have to remove anything, you can just reach behind the paneling.
* No power steering fluid in reservoir * The power steering pump is not operating
You have to ask a more complete question.
Power windows normally use a breaker, not a fuse.
Power seats are usually on a breaker, not a fuse.