It comes on when wheel spin is detected. This indicates the system is working.
It comes on when wheel spin is detected. This indicates the system is working.
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
1999 Chevy lumina, won't start, security light comes on ,can jump the starter but motor will only run for a short time , strong battery ? tried different keys , no good ? help
temp light is on a 1991 Chevy lumina car not hot...
NORMALY ON ANY CAR WHEN A DASH WARNING LIGHT COMES ON MEANS THE SYSTEM IS MALFUNCTIONING OR HAS A PROBLEM AND NEEDS TO BE CHECKED. IN THE CASE OF ANTI-LOCK YOUR BRAKES MIGHT ONLY WORK WITHOUT THE ANTILOCK UNTILL CHECKED WHICH MEANS IT WILL TAKE YOU LONGER TO STOP AND YOU CAN LOCK UP YOUR BRAKES. GET A FREE BRAKE CHECK AT LOCAL SHOP.
The temperature light comes on in a 1992 Chevy Lumina when the temperature of the engine reaches the boiling point. The light may also come on if the transmission gets too hot. Usually a leak in the radiator system will cause a loss of fluid and lead to the temperature light, but it could be anything and must be checked.
If you wait for a light to come on, you'll be stranded... No light.
THere should be an ABS warning light that comes on briefly along with all the other indicator lights when you turn the ignition on.
dash light on my 1996 chevolet lumina is not working where i am able to read mileage
If the ABS (antilock brake system) light stays on, there is a problem with the system and it will not function should you need it in a panic situation. Have a mechanic repair it soon for your safety.