How do you change the thermostat in 1999 Mercury Villager
depends is it the thermostat housing or the gasket. it is either connected to the hose or the water pump
The bulb end goes toward the engine.
At the front of the engine under the housing that attaches to the coolant crossover tube assembly.
There is no such part on a Mercury Villager.
yes!
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
System airbound and needs to be purged
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
To change the thermostat on a 2002 Mercury villager, pull the hose away. If the bolts do not come off, wiggle the fitting to expose the thermostat to be able to change it.
Either the thermostat was not the problem, or you put it in backwards.
Yes, it should fit.