there is a white almost tanish looking solid color wire on the group of wires that plug into the guage cluster use a quick connect to connect the signal wire from the tach to the white wire on the guage cluster
Hook it to the negative side of the coil.
You would hook to the negative side of the coil. Some HEI distributor caps are marked "tach".
get a VCR player and hook up it by the back inputs
on the drivers side of the distibutor cap using a blade electrical hook up you can plug into the opening or if there is a wire already there splice into it make sure all your grounds are in place or you will burn up you coil
need to know where to hook coil wire is all i need to know.
red (+) wire to possitive side of coil- Black (-) wire to negative side of coil. thats it.
2 screws.
Yes it does.
The green wire from the tach goes to the negative side of the coil.
no it doesnt have the RCA plugins in the stock unit and its almost impossible to workout with a wiring harness hookup to an aftermarket stereo.. ive been trying to work things out for about 5 months now and ive figured out the harness for 1994-now galant doesnt match with the stock harness so im just going to let best buy do it all
under the coil pack in the engine compartment. The coil pack is where the plug wires hook into it.
u have to look at ur distributor if it is an HEI "coil on top there is markings on the distributor cap for the tach but if it is a regular distributor with an external coil you hook it up to the neg wire off the coil neg/ black wire