2.4L should be located at the engine end of the upper radiator hose On the 2.7 motor the thermostat is located at the engine side of the lower radiator hose
It is under the housing where the upper radiator hose hooks to the engine.
It is located under the housing where the lower radiator hose hooks to the engine.
No. The 2. 7 L V6 has one thermostat located where the lower radiator hose attaches to the engine.
The thermostat should be where the bottom hose of the radiator is conected to the motor, next to the oil filter..
The spring goes into the engine block.
It is on the radiator side of the engine, behind the motor mount.
Under the motor on the drivers side towards the front of the car. Follow the lower radiator hose from the radiator to motor to locate it.Sorry, but that is wrong. The thermostat is under the cover where the TOP radiator hose attaches to the top of the engine block...
The thermostat is located under the housing cover bolted on the motor. follow the top radiator hose to the motor. the thermostat is under the hose flange that the radiator hose attaches to.
The Chrysler Sebring knock sensor is located in the engine valve or cylinder located at the back of the motor. This part is in this position next to the engine valve so the sensor can feel the vibration of the engine.
Easy right in the front of the motor follow the rad hose that goes to the top of the engine that is where your thermostat is located
Front center of the engine, behind the motor mount bracket.Front center of the engine, behind the motor mount bracket.