The thermostat is located in the right corner of the car, there will be a connection that has a y-split look to it. It allows the coolant to go into the block. When replacing this, make sure to buy the thermostat and new gasket (sold separately). You must perform this by draining the coolant out of the system first, while engine is cold, because the system is under 15 psi.
where do i find the thermostat for 99 cavalier
The 2.2 liter Chevy ecotec?æwill fit into your 1998 Chevy Cavalier. The wiring harness and the motor mounts will need to be replaced.
It will be in the thermostat housing where the radiator house connects to your motor.
If you have the 2.2/134 Ecotec then the thermostat is very difficult to get to. It is on the right side of the engine underneath the power steering fluid box and the other hoses. If you trace the hoses from the radiator, you'll see it. Good luck getting to it!
Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.
on the water pump
The clutch bleed valve on a 2.2 liter Chevy Ecotec engine is located on the slave cylinder. To find the slave cylinder remove the battery, as it is mounted underneath the battery tray.
how do you change a thermostat sensor in a 2001 Chevy cavalier and where is it
The thermostat on a Chevy 2.2 engine should be located under the top hose inlet. The top hose as well as the inlet need to be removed to get to the thermostat.
Usually in housing at engine end of upper radiator hose
bottom of engine below ex manifold.
Take a look where the lower radiator hose connects to the engine. Where the hose connects, you should find the thermostat.