Follow the upper rad hose from the rad to the engine and you will find it at the end of the hose, when replacing the thermostat, make sure the spring goes toward the enigne. It is under Thermostat Houseing. Just follow top rad.Hose away from Rad. Its under the houseing that the hose connects to on motor side of hose.
The thermostat on a 1999 Chevy Monte Carlo with a 3.1 is located just below the throttle body. It is covered by the top radiator hose attached at that location.
It is normally where the upper radiator hose meets the engine block.
Remove the water supply hose from the top of your 2003 Chevy Monte Carlo thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out. Drop the new thermostat in and reverse the process.
were is the bcm located on a 2000 monte carlo
On a 2000 Chevy Monte Carlo it is along the frame rail on the drivers side
Under the thermostat
where is the vaccum canister located on a 96 monte carlo
just follow the top radiator hose to the engine and where it clamps on you will find the thermostat, 2 bolts takes the housing off and the thermostat is under it.
No. One of the two bolts that hold the thermostat housing to the engine is a challenge.
There is no such thing as a 2008 Monte Carlo, so the answer would be no.
Water pump removal chevy monte carlo 3.8
No