0
it is in a housing on the passenger side of the engine. it is about six inches south-west of the distributor. go to autozone or advance auto web site and you will see the complete diagram of the location. the housing is held in place with four 12mm head bolts. you will need short extensions, flexible extensions to remove the bolts because space is very tight. when installing a new thermostat, make sure the little valve is positioned in a 12 O'Clock point. when i replaced mine, i used a real gasket that was held in place with Indian Head gasket sealant. also, insert the bolts through the housing prior to attaching the housing to the engine. i used a little glue to hold them in place. this will prevent the gasket from sliding off and the holes to stay aligned during the re-attachment process. finally, pay attention to the direction of the thermostat that is facing the engine and the direction facing the hose. good luck. i hope you have small wrists.
Add your answer:
Earn +20 pts
Where thermostat 1999 villager?
How do you change the thermostat in 1999 Mercury Villager
Where is the heater core on a 2001 mercury villager?
mercury villager heater core 2001
Will a 2001 mercury villager 3.3 fit in a 1999 mercury villager?
Yes.
Where is thermostat on 2001 villager?
by da engine
Does a 2001 Mercury Villager have a timing chain?
No , the 3.3 litre V6 engine in a 2001 Mercury Villager has a timing BELT
Where is the thermostat in a 2000 mercury villager?
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
Will the engine out of a 2001 mercury villager fit a 2000 mercury villager?
Yes it is exactly the same.
Where is the thermostat located in a 2000 Mercury Villager?
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
How do you change thermostat on 2002 mercury villager can't get bolts off?
To change the thermostat on a 2002 Mercury villager, pull the hose away. If the bolts do not come off, wiggle the fitting to expose the thermostat to be able to change it.
Why does your 1994 Mercury Villager overheat with a new thermostat?
Either the thermostat was not the problem, or you put it in backwards.
Where the thermostat is on your 1995 mercury villager?
In front of the engine, down in the "V".
What size is the gas tank on a 2001 Mercury Villager?
According to the 2001 Mercury Villager Owner Guide : ( 75.7 litres / 20.0 US. gallons )
