It is the two wire sensor next to the thermostat housing.
To replace the thermostat on a 1997 Pontiac Grand Am 3.1, first disconnect the negative battery terminal and loosen the clamp on the radiator hose. Next, remove the mounting bolts from the thermostat housing and insert the new thermostat.
Should be in a removable housing at the engine end of the upper radiator hose
Usually in a removable housing at the engine end of the upper radiator hose
no
Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
On the V8 it is on the passenger side top of the transmission bell housing, on the six cylinder it is on the driver side top of the transmission bell housing.
follow the top radiator hose to the motor the hose is clamped to the thermostat housing remove the housing and you will find your thermostat
How do you change the orifice tube on 1997 grand Cherokee jeep with 5.2 v/8
Yes!
It will bolt up, but it will not shift. 1997 is electric, 1994 is hydraulic