Thermostat housing diagram for a 2000 Pontiac grand am?
Located in a removable housing at the engine end of the upper radiator hose
The thermostat is located near the intake on a 1999 Pontiac Grand Am GT. The thermostat can be located by following the upper radiator hose directly to the thermostat.
Inside the thermostat housing, follow the upper rad hose back to the engine, under the throttle body.
Follow the upper raditor hose from the raditor to the motor, the raditor hose is connected to the thermostat housing, take the houseing off, the thermostat is under the housing.
On a Jeep Grand Cherokee v6, the thermostat is located in the thermostat housing. The housing can be easily located by following the upper radiator hose to it.
At the point where the upper radiator hose clamps to the engine is the thermostat housing. Inside is the thermostat.
IF ITS A QUAD 4 THE HOUSING IS ON THE RIGHT SIDE OF THE VALVE COVER BY THE POWER STEERING BELT 2 BOLTS.
in the water pump
can you show me governor for grand prix and how can i take it of. thermostat should be located on the left side of the motor inside thermostat housing housing needs to be remove to replace thermostat
The 1999 Pontiac Grand Am AIT sensor is located on the outside of the air filter housing. The sensor will be on the back of the housing.
To replace the thermostat on a 1997 Pontiac Grand Am 3.1, first disconnect the negative battery terminal and loosen the clamp on the radiator hose. Next, remove the mounting bolts from the thermostat housing and insert the new thermostat.