show diagram for firing order for a 1996 ford windstar 3.8 engine
The tachometer wire on an ECU is typically purple in color.
a tachometer, wire and wire terminals
look at your trany it should have a wire going into it on the top side in the middle
White wire coming from the distributor.... remove a section of sleeve from wire and splice the signal wire from tachometer to it!
The blue wire on a tachometer is usually connected to the instrument panel lighting circuit. This allows the tachometer to light up when the vehicle's headlights are turned on. It is important to consult the tachometer's installation instructions for specific details on wiring connections.
pin 48 on the pcm connecter is tach signal connect to your green wire from tach
Green wire on the distributor is the tachometer pick up. Green wire on the distributor is the tachometer pick up.
Black wire to ground, red to batt, white to instrument lamps and green goes to PCM white wire with pink stripe!
YELLOW
A haynes manual will have that. Find at your local auto parts store.
I think you can by attaching it to you spark plug wire