The solenoid pack on a Chrysler Sebring is on the bottom of the transmission. It is a bolt on unit and can be easily replaced.
The solenoid pack on a 2002 Chrysler 300M is inside the transmission. It is bolted to the top of the valve body.
The solenoid pack on a LHS is inside the transmission on top of the valve body.
The solenoid pack is inside the transmission, on top of the valve body.
To replace the transmission solenoid pack on a 1998 Chrysler Sebring, remove the air filter box, the battery, and the battery tray. Remove the 4 bolts on the frame and the trans cooler lines. The solenoid pack is screwed to the to the transmission with 3 10 mm bolts. Remove the solenoid pack and replace it.?æ
The solenoid pack is located on the top side of the valve body, in the transmission.
The solenoid pack is on the front of the transmission, just below the cooler hoses.
The solenoid pack is activated by the transmission computer to control fluid flow in the transmission. That is how the correct gears are selected.
Under the air cleaner.
There are three bolts that hold the solenoid pack to the case,There are three bolts that hold the solenoid pack to the case,
The solenoid pack is on the front of the transmission case, below the cooler hoses.
The starter solenoid is on the starter. The transmission solenoid pack is on the front of the transmission case below the cooler hoses.