I have the repair manual in front of me (Haynes), and it says that the Lumina has the PCV valve in the valve cover. Hope this helps? On the 1992 Sable with either the 3.0L or 3.8L it is on the back valve cover (closest to the passenger compartment). It is harder to get to the PCV on the 3.8L engine. The actual PCV is connected to a rubber grommet on the engine valve cover and the other side PCV there is a hose that leads to another part of the engine.
Wete does the pcv tubing go on1999 chevy lumina
4 cylinder does not have pcv valve.
the PCV valve is located on the valve cover of a 1991 Regal Custom. It is plugged in and can be easily changed.
The PCV valve on a 1991 Dodge Dynasty 3.0 engine is on the passenger side of the vehicle. It is on the crankcase.
=== === === ===
on the valve cover
The PCV valve is located in the rear valve cover next to the firewall. It can be reached and changed without rotating the engine forward although it is a bit of a struggle.
It's under the plenum in the back of the engine.
the pcv is located under the fuel injection plenum, towards the back of the engine as opposed to some newer models that have this valve located in the front of the engine on the valve cover
yes it does, all engines have a pcv valve ( positive crankcase ventilation ) valve. it is on the engine and vacuum goes to it from the valve covers.
Pass side valve cover.
For the 305 (LO3), the PCV valve is located on the driver's side valve cover. It's held in place with a rubber grommet.