The PCV valve on the Supercharged GM 3800 series II engine is located under the plastic cover over the supercharger it is towards the back- a square black plate covers the PCV valve- there is a spring pushing against the bottom of that plate. there are two bolts that hold the plate on but be careful when you put the plate back on and screw the two bolts back in they are very cheap and break if u torq them too much. torq to about 78 lbs.
Its located on the driver's side of the engine bay behind the intake manifold. If you follow the headers you will see a cylindrical object with an electrical connector. That's it
the PVC valve should be located on the valve cover by the intake manifold on top of your engine block
On a centrifugal supercharger(Paxton, vortech, procharger-yes. On a whipple /eaton- no because they are located between the throttle body and engine, BOV only work when the throttle body is between the supercharger and engine.
A supercharged intercooled DOHC with 16 in-line valve inline-4, port fuel injection, and an aluminum head abd block. The base price for the Chevrolet Cobalt SS Supercharged is $21,995.
the PCV on your 2003 Frontier S/C is on the passangers side Rocker cover(valve cover)
I think it is around 300 unless it is supercharged, then it will be about 550 hp
it is black and right be side the throttle body with a 4 wire plug in the top of it with a metal bracked surrounding it
The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.
It is located on the top of the valve cover towards the rear of the engine.
the egr valve is located on the right hand side of the engine on the side just under the engine cover
There are ( 2 ) valve covers on the engine in a Ford Excursion V8 engine
the pcv is located under the fuel injection plenum, towards the back of the engine as opposed to some newer models that have this valve located in the front of the engine on the valve cover