The heater control valve motor is located below the dash on the passenger side. First remove the glove box, then the lower trim panel. Before removing the lower trim panal remove the center trim around the radio and A/C controls. After removing the lower trim panel, the heater control valve motor is on the left side underneath the automatic compressor controller, connected to the heater control unit.
Replace the heater control valve motor, a dealer part, costs around $166.00.ish
Attached to the intake manifold
on the upper left side of youre firewall
The EGR Valve on the 1996 Mitsubishi Galant is located underneath the Exhaust Manifold.
http://www.scribd.com/doc/6382741/Mitsubishi-Galant-2003-Systeme-de-Chauffage-Et-Climatisation- check section 50-40 AlexR
one per valve
It does not have a heater control valve.It does not have a heater control valve.
The strainer valve on the Mitsubishi Galant 2004, 2005, 2006 models is located next to the engine manifold.
10 in 10 ex
The heater valve is located behind the dash above and to the right of the accelerator pedal. The heater core is right beside it. It is operated by a linkage to the slider on the heater control panel.
Where is the the heater control valve??
The EGR valve, on your 2005 Mitsubishi, is located beneath the air cleaner. Remove the air cleaner housing. The valve should be visible and labeled.