Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator 1. Disconnect the negative battery cable. 2. Properly relieve the fuel system pressure. 3. Remove the air cleaner outlet tube(s). 4. Remove any necessary components to access the pressure regulator. 5. Disconnect the vacuum hose from the pressure regulator. 6. Remove the pressure regulator attaching screws. 7. Remove the pressure regulator from the fuel rail. To Install 8. Discard the O-rings on the pressure regulator and replace them with new ones. 9. Lubricate the O-rings with clean engine oil. 10. Install the regulator into the fuel rail and tighten the retaining screws. 11. Connect the vacuum hose to the regulator. 12. Install any components removed to access the regulator. 13. Install the air cleaner outlet tube(s). 14. Connect the negative battery cable.
I believe it is in the back of the alternator
Follow the recommendations on the sidewall of the tire.....not the vehicle.
Yes , XLT and Eddie Bauer are just two of the Ford trim levels
If the heater is not working in your Eddie Bauer edition Ford Expedition, your heater core is probably junk and needs to be replaced.
The Ford Expedition XLT or Eddie Bauer are two of Fords trim levels ( Eddie Bauer having more standard features than the XLT ) So , if the Ford Expeditions are the same model years , the amount of space inside is the same
Yes , XLT and Eddie Bauer are just two of the Ford trim levels
Ford Expedition EB
In a 2000 Eddie Bauer Ford Expedition, the computer module is located under the dashboard and to the left of the brake pedal. The module should be cream-colored.
yes it does
R-134a
10 in. subwoofer
As far as I know , you inflate the tire(s) to the correct pressure and then drive the vehicle