No inertia switch.
You have to recalibrate the muffler bearing first.
The number 1 cylinder is the cylinder to the right when you open the hood.
Under Passenger Side Panel under glove box to the left.
It is on the wiring harness under the hood on the passenger side of the firewall.
My 92 Eagle Summit has the horn fuse in the fuse box on the driver's side leg area near the emergency brake (on an auto). If the cap to the fuse box is missing (there's a diagram of all the fuses on it), check for burnt fuses.
It's a two pin blue plug that resides behind your radio. You have to reach around the back of the black plastic center console.
very bottom of the xfer-case near the back. it is a large plug like 24mm or around that size
You have to plug the computer into the Ecu and the ECU is located under the hood on the drivers side under the plastic peace next to your windshield You have to plug the computer into the Ecu and the ECU is located under the hood on the drivers side under the plastic peace next to your windshield
92-96 Hondas in general have OBD1, not OBD2 and therefore no OBD2 / diagnostics plug.
yes and turbo.
no it wont. the blocks are different..