The cruise control module of a 1993 Mercury Villager is located under the passenger side of the dashboard.
The cruise control computer module is located on the passenger's side of the engine compartment on a 1993 Mercury Villager.
On the brake pedal.
Check 15 amp fuse "R" in the fuse box. It appears that the horn relay feeds part of the cruise control system.
The horn relay and the cruise control steering wheel switch are powered from the same fuse. Check fuse #44 at the inside fuse panel under the dash.
The standard location of the cruise control module is on the steering wheel. In 1993 some models have a side arm that houses the cruise control module.
It attaches to throttle plate (next to throttle cable) to cruise control unit.
If the cruise control is not working on a 1993 Villager GS with 199,000 miles, the problem could be the MAP sensor. It could also be an oxygen sensor that is bad. There is also a possibility that the unit's main fuse is blown.
where is my cruise control fuse located for a 1998 sts
In order to fix it, you'd have to determine what's wrong with it, whether you have a bad brake switch, a blown fuse, a bad steering wheel switch, a bad servo, or some other problem.
There is no isolated fuse for the cruise control. It all runs off the 20A gauges fuse. If you are having trouble with the cruise control I would check the Cruise Control Module or the Cruise control Servo. What symptom is occurring?
The Chrysler Sebring cruise control switch is located beneath the dashboard, on the drivers side. The cruise control switch should be labeled as such.