i
Anybody who tells you to remove the four screws to get to the blower motor on the SIERRA is FOS!
First remove the cover under the glovebox- No you don't have to remove the glove box. If you can remove the 2 easy ones using 9/32 and a stubby, the third one you can loosen and just let the cover drop. Now disconnect the resistor from the motor. Its a clip so do this in the daytime.
Locate the blower motor. Its under the glovebox. Look for the tab on the top of it, by sticking your head in there. rotate the blower motor clockwise and it will drop right out.
Don't lose the screws, the hardest part is putting it back together.
blower motor for 1998 gmc sierra 4x4 is located on the passsenger side,under the dash, you will need to remove the glove compartment door for easier accessand to remove blower motor cover.
Remove the wiring harness from the back of the blower motor in your 1993 GMC 1500. Remove the blower motor retaining bolts. If the new blower motor does not have the fan attached to and you will need to remove the fan from the old blower motor. Reverse the process to install the new blower motor.
BLOWER MOTOR RESITAR SWITCH
Under the dashboard at the feet of the passenger side.
under the dash on the passenger side, remove the panel on the bottom of the dash, and its behind the blower motor
Remove blower motor 97 GMC jimmy
below glove box remove heater/air conditioning cover then remove blower motor cover
The 2005 GMC Sierra-2500HD has 16 valves.
The 2005 GMC Sierra-2500HD has a V8 engine.
The 2005 GMC Sierra-1500 has 12 valves.
The 2005 GMC Sierra-1500 has a V6 engine.
where is blower motor resister located on 2001 GMC Yukon