location and replacement of pcv valve and egr valve on 2005 Ford Taurus se
The EGR position sensor is located on top of the EGR valve. Has an electrical connector attached.
On the firewall next to the EGR vsv.
This issue is typically caused by a broken or jammed EGR (Exhaust Gas Recirculation Valve). To remedy the problem, you must remove the old EGR valve and replace it. Attached is an Article from AutoZone on how to determine if it is the EGR valve and how to replace the EGR on a Generation 3 (1996-1999) Ford Taurus, It will also determine if your problem lays in other EGR components.
Contact your dealer.
I have a 93 4.0 and it has no EGR valve. My neighbor who is a ford mech. says some don't have EGR's and some have only one O2 sensor.
The EGR sensor is part of the EGR valve on the rear pass side of the engine.The EGR sensor is part of the EGR valve on the rear pass side of the engine.
The egr position sensor is part of the valve. It does not have a flow sensor.
The 2001 Ford E GR valve position sensor is attached to the firewall, in the engine compartment. The sensor will be on the drivers side of the engine compartment.
ther always next to and wired in to the egr valve on intake manifold
insufficient egr flow most causes a burned silicone hose to egr pressure sensor
it is beyond the main throttle body. it is round about the size of a tangerine. it is black on my car.