Located at the evaporator inlet which is under the dash in the heater/AC housing.
Attached to Evaporator.You have to remove the evaporator from inside the car to get to it. A pain.
Where is the PCV valve located on 97 Toyota Camry and how to replace it.Read more: Where_is_the_PCV_valve_located_on_97_Toyota_Camry_and_how_to_replace_it.
Located at inlet to AC evaporator which is located under the dash in about the center of the firewall. The entire dash has to come out to get to it.
The expansion valve is located on the passenger side of the vehicle behind the dashboard. To gain access to it you will have to remove the glove box and the dash.
Under the dash board, exactly in the middel. You need to remove the dash board compleately to get to it.
There is no PVC valve on the 4cyl Toyota Camry. ÊThe location of the PVC valve on the 6cyl is center upper engine area, mounted in the rear valve cover.
The name of the plastic piece that holds the lines to the expansion valve in a 1995 Toyota Camry is called a clam shell ventilator. As of 2013, the clam shell ventilator can be purchased for around $10, plus tax and shipping.
check under
The ORVR valve in a Toyota Camry is an on-board refueling vapor recovery valve. This valve is located in the upper portion of the fuel tank.
how do i remove the valve cover to change the gasket in a toyota camry 1996
It is a large silver cylindrical shaped valve with both A/C lines going to it. Trace your A/C hoses to locate it.