Yes it will bolt right up to it.
It should be on the front of the intake manifold directly above and behind the water pump.
The fuel lines around the filter; you will need an adapter.
.043
Use an exhaust made for an LT1 engine the blocks are identical it is the insides that is different. Will bolt right on.
.43L. 1000ml=1L
Don't know what year you have but some sensors are temperature sensitive and you should run a 195 degree thermostat.
4L60/E l
43L of 18-k gold
0 degrees,should say right on the fan shroud on the same sticker that tells the spark plug gap. In order to time it correctly you must unhook the esc electronic spark control wire which is a tan wire with a black stripe located under the black cover on the passenger side firewall. It may set off a service engine soon light. When your done timing it unhook the battery cable and the light should go out.
There is one before and one after the catalytic converter.
1993 CHEVROLET K1500 PICKUP V6 4.3 (262) Z GAS engine 4207 PLATINUM PART Gap=.035 4449 PLATINUM+4 Do not Gap HR9BP PLATINUM PLUG Gap=.035 4302 PLATINUM2 Do not Gap HR10BC SUPER PLUG Gap=.035 7585 SUPER PART Gap=.035