The 2003 Saturn L200 does not have a camshaft position sensor.
The camshaft position sensor on a 1999 Saturn SL1 is typically located near the camshaft itself. It is often situated on the cylinder head or timing cover, close to where the camshaft rotates. Refer to your vehicle's specific service manual for the exact location.
There isn't a camshaft position sensor. If you are asking because of an error code you received, it is caused by a signal that mimics the same signal as a camshaft position sensor.
The camshaft position sensor is located on the end of the camshaft housing, on a 2002 Daewoo. The sensor should be labeled as such.
Where is the camshaft position sensor located on 1990 Lexus ls400?
The Camshaft sensor is located in the distributor.
Do you have a video of the hhr camshaft position sensor
The 2003 Saturn L200 has a camshaft position sensor. It is located on the bottom front of engine behind the Starter. You will need to remove the two bolts that are holding the Starter to get to the sensor.
The Camshaft Position Sensor is located behind the Power Steering Pump.
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
The 1998 Saturn SL2 will show a code 340 and 341 for a camshaft position sensor because this part is also considered the crankshaft position sensor on the Saturn. The location of the crankshaft position sensor is behind the alternator on a 1998 Saturn SL2. Both crankshaft and camshaft are the same thing This vehicle is not equipped with a camshaft position sensor. Saturn is the only manufacture that uses a auto pulse generated inside the ignition control module in conjunction with the pulse received from the crankshaft position sensor to determine ignition and injection timing. If you have a code for camshaft position sensor the issue is with the pulse generator in the ignition control module.
The 03 Saturn Vue does not use a stand alone camshaft sensor. The system uses the ignition system as a sensor, tapping into the number one and four cylinder firing systems.