A very good question (and one not helped by the absence of a Hayne's manual);
1) Remove the grey plastic cover on top of the engine block by turning the 6 plastic screws 90 degrees. 2) Remove the 3 bolts securing the black plastic cover in the centre of the engine block. 3) Lift up, and hey presto - there they are!
0.9mm
normally glow plugs are used on an IDi[ Indirect Injection] diesel engine. most peugeot 206 vehicles have an HDi engine[ Peugeot's nomenclature for Commonrail Direct injection]. hence there will be no glow plugs in those 206 vehicles. Some of the base model 206 from the first few years shipped with the non-HDi DW8 engine - which do have glow plugs. Check which model you have. If it's 1.9, then its the DW8. Else it is probably an HDi. Replace quickly if they start to fail.
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
If the windscreen wiper is electric or controlled by a switch, it has a fuse. The wiper fuse on a Peugeot 206 is located in the fuse box in the engine compartment.
How to disable Peugeot 206 immobilizer?
There could be many reasons why the vehicle won't start. The battery could be drained, there may not be connection on the battery post, there may not be a spark between the spark plugs, the starter could be going bad, or the solenoid may need to be replaced.
A Peugeot 206 is a type of automobile. It is a car of the hatchback variety. A used Peugeot 206 is one of these automobiles that has had a previous owner.
no
Many Peugeot 206 cars were made in France, with the factories being located at Poissy and Mulhouse. Some were also made in other countries, including Chile and Brazil.
show me photo of timing engine peugeot 206 rc
where is the rev counter sender unit in peugeot 206 how to get at it
The thermostat on a Peuget 206 is located on top of the engine, under the upper radiator hose. It controls the flow of coolant out of the engine.