0
this happened to me on my 98 Honda accord and it was because my brake lights and sinal lights were not working properly
Most likely, the brake light switch is stuck.Have you checked your brake fluid level? You could be dangerously low.
If you mean that your exterior brake lights stay on even when you aren't pressing on the brake pedal, you most likely have a bad brake light switch.
If you follow your brake pedal arm up under the dash, you should see a switch that comes in contact with the arm. It might have been knocked out of position and all you need to do is put it back. If it is in its correct position, it is probably bad and will need to be replaced.
It works like this...when you press on the brake pedal, the arm moves away from the switch, thus turning on your brake lights. When you release your foot from the brake pedal, it contacts the switch and your brake lights turn off.
Add your answer:
Earn +20 pts
What would cause no brake lights in rear when the running lights are on the vechile is Nissan sentra?
brake light switch would be most common cause
What would cause brake lights and running lights not to work you have power to the brake switch?
fuse, bulbs
What would cause your brake lights to not come on with the headlights on If the headlights are off the brake lights are fine?
Possible ground issue at the taillights.
What would cause the brake lights not to work on an 84 corvette when all of the running lights work?
BAD BRAKE LIGHT SWITCH AT TOP OF BRAKE PEDAL
What causes the brake lights to fail when all other lights are working fine?
The BOO (Brake On/Off) Switch may need to be replaced. If it is bad, it would cause the brake lights to NOT illuminate when the brake pedal is applied.
What would cause brake lights not to go on?
More than likely it is the brake light switch that is attached to the brake pedal.
What would cause brake lights not to work but all other tail lights are working on a Ford F-350?
Check your brake light switch at hte brake pedal.
What would cause the brake pedal to be hard and still no brake lights on a 2006 Lincoln navigator?
brake switch located on the top of the brake pedal
What would make your brake lights not work?
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.
What would cause brake lights not to come on until the brake pedal is all the way compressed?
Check the switch adjustment on the brake pedal arm.
What would cause brake lights emergency lights etc to stop working?
Check the bulbs - they are doubloe filamented with the smaller being for brake/turn signals Check the fuses
What would cause brake lights to stop working on 1997 intrepid?
Blown fuse, bulb, or bad brake light switch.
