engine mounts I had the same problem with my 95 aurora. in the very front under the hood ther is a black plastic wind scoop (good place to store oil). i kept my oil there and it broke the mounting screws, creating an annoing vibration at around 60-70 mph. press on the scoop if its loose use self tapping screws to remount.
A bad wheel bearing
check the front shocks or struts to see if they are worn out, worn out struts could cause the front tires to hop at higher speed.
Yes because during braking your tire will loose contact with road which will affect our stopping distance. it will also cause waves on the tire and when you do replace your struts you will have a vibration while driving
Could be several reasons and pretty much the same for any vehicle: -Improper replacement -Bad forward universal joint causing vibration at transmission tail -Unbalanced driveshaft causing vibration at transmission tail -Bad transmission mount Universal joints usually "clunk" when bad Unbalanced driveshafts will cause a vibration when driving - the faster the speed the more the vibration
yes, A vibration with a frequency high enough to cause itching
There are a number of forces that could cause vibration in a ship. Friction for example is a force known to cause vibration.
Yes. Bad struts effect the handling of a vehicle. In an emergency situation where you are required to make a quick maneuver, those bad struts can cause you to not be able to avoid an accident. They will also cause your tires to wear out prematurely.Yes. Bad struts effect the handling of a vehicle. In an emergency situation where you are required to make a quick maneuver, those bad struts can cause you to not be able to avoid an accident. They will also cause your tires to wear out prematurely.
No, this will not damage or cause wear on the struts in any way.
are u sure its from the engine and not the tranny or front end? if from engine a motor mount or a bearing rubbing tranny may be slipping and catching or the torque converter, also front end may be worn if 4wd such as driveshafts and stuff or alignment
yes
A bad wheel hub searing can cause vibration on your steering. Loose or broken steering and suspension components can cause vibrations when accelerating, decelerating or changes in speed. Worn tie rod bushings, damaged struts or shocks are common causes of vibration. Drivetrain problems, such as a bad wheel bearing, damaged CV-joint (front-wheel-drive cars), a bent or imbalanced driveshaft (rear-wheel-drive cars) or missing chassis/drivetrain damper weights are all examples of speed-sensitive vibrations.
Bent wheel, tires out of balance, front end out of alignment, worn steering or suspension parts, bad shocks or struts, bent drive shaft, broken motor mount, or a combination of any of these.