According to the 2006 Mercury Mountaineer Owner Guide : The vehicle came from the factory with a 50 /50 mix of distilled water and : ( Motorcraft Premium Gold Engine Coolant , yellow colored , meeting Ford specification WSS-M97B51-A1 )
If you are just topping up , a 50 /50 mixture of antifreeze and preferably distilled water ( Ford states to not exceed 60 % antifreeze ) can be added to the reservoir to bring the level up to the cold mark with the engine cold
The engine cooling system capacity , including the reservoir is 12.8 quarts on a 1997 Mercury Mountaineer So , a 50 / 50 mix of antifreeze and preferably distilled water ( that's the way it came from the factory ) would take * ( 6.4 quarts of antifreeze ) *
In the Power Distribution Box in the engine compartment ( Ford recommends disconnecting the battery before servicing anything in the PD BOX ) Fuse # 9 is a red color 50 amp maxi-fuse for the blower motor and blower motor relay
A 1999 Mercury Grand Marquis came from the factory with a 50 / 50 mix of distilled water and ( GREEN color antifreeze , meeting Ford specification ESE-M97B44-A )
( No ) a 1996 Mercury Cougar came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
According to the 1996 Mercury Sable owners manual :It came from the factory with a 50 / 50 mix of distilled water and GREENcolor antifreeze ( meeting Ford specification ESE-M97B44-A )
well in 1973 a ford van was 2350.00. so that might give you some idea.
Usually about 2 gallons of a 50/50 mixture of antifreeze and water
According to the 2001 Mercury Sable Owner Guide : It came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
According to the 1999 Mercury Sable Owner Guide : It came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
A queen-size bed will fit into a Ford E1 50 cargo van. The queen-size bed will not lay flat. It will need to be put in on an angle.